Rebuilding A Wrecked 1967 Chevrolet Camaro SS Part 2

The moment we have all been waiting for!!! Whats underneath the hood? We finally opened up the bonnet where we reveal the power plant of this 1967 Camaro SS! This things is going to be an absolute beast when its all said and done. Also we noticed a few wild unexpected things underneath the car as well. Going to be a touch one here but I think with your help we can get it going! Thanks For Watching!!!


-Instagram: goonzquad


-P.O. Box 37
Rossville,GA 30741


  1. Michael Bouley

    Michael Bouley4 dagen geleden

    It is a junk Yard motor

  2. Mike Loheac

    Mike Loheac6 dagen geleden

    maybe this car got dropped off a trailer on its side, I dont think it ran before the accident.

  3. Mike Loheac

    Mike Loheac6 dagen geleden

    Unibody is right


    DATSON 1934 DATSON7 dagen geleden

    original camaro 👍 Z28 big block 4 speed it well be awesome not many levet of this cars we need every original one

  5. Alex Rico

    Alex Rico10 dagen geleden

    cammed out like wopwopwopwop😭

  6. DarkMatter

    DarkMatter14 dagen geleden

    my first car was a '67 Camaro... it wasn't as cool as that...had a 350, 2 speed powerglide, drum brakes all around. It handled like a waterbed... but it was still cool as hell! I'm enjoying this build!

  7. TGF Goffster Goffster

    TGF Goffster Goffster15 dagen geleden

    If they say "Dude" one more time!!! LOL..Love these guys excitement!!

  8. Ruac Woensdregt

    Ruac Woensdregt15 dagen geleden

    Replace the motor and trans with something decent and check the suspension full out even the brakes the mf that built this POS cut corners like a mf

  9. bryan diel

    bryan diel15 dagen geleden

    what you pointed out are called subframes.

  10. TragicSki

    TragicSki16 dagen geleden

    how much for the motor??

  11. Steve Ledbetter

    Steve Ledbetter17 dagen geleden

    The metal block that you have in your Camaro me could have came out of a escalade or a truck the corvette LS1 was aluminum people use a cheaper motor to save money motor is the same just heavier because of the metal block but you still can add cams and heads for more power . 🤘🥸

  12. J.R Heath

    J.R Heath17 dagen geleden

    Don't get me wrong you guys make good videos but you spend more time talking like your telling long stories than actual working on whatever projects your doing. If you spend less time talking and work more you get more videos out there. Oh by the way hopefully you didn't spent a a lot money for that car? If so you got screwed big time.

  13. Cole Lynch

    Cole Lynch21 dag geleden

    Do they not know that it’s boosted? It has a procharger

  14. The big J and little J Channel

    The big J and little J Channel22 dagen geleden

    You guys have to be 🤑

  15. citic101

    citic10125 dagen geleden

    HOW much did they ^pay for it

  16. Liae Siufanua

    Liae Siufanua29 dagen geleden


  17. Andrew Rojas

    Andrew RojasMaand geleden

    Raptor 😭 wanta that trailer off

  18. Ed Wilko

    Ed WilkoMaand geleden

    its had a engine swap as knew it was totalled & hos old engine put in.

  19. Rod Langston

    Rod LangstonMaand geleden

    I got you on some OEM kicker panels for the free!!! And SS grill

  20. Eric Uhrick

    Eric UhrickMaand geleden

    Totally feel like the guy just out a truck motor in it and took the good motor out with spare parts

  21. BLK GNX

    BLK GNXMaand geleden

    Holy shit guys i have not watch your videos in a little while and i noticed you guys are soo friggin hyper like bouncing off the walls. Cranked to a 1000. Maybe a little too much caffeine or something LOL.

  22. Daniel Cross

    Daniel CrossMaand geleden

    Nice , about time the channel did a classic , love the content , well done guys

  23. Haizar Rahman

    Haizar RahmanMaand geleden

    It's a LS10 ?

  24. MillerMotorSports

    MillerMotorSportsMaand geleden

    those are subframe connectors to keep the body from twisting under the torque

  25. Sterling Stauffer

    Sterling StaufferMaand geleden

    I hate being late for an upload😢

  26. Cory John

    Cory JohnMaand geleden

    Your parents are too cool, you look to have made them very proud! Good work fellas

  27. Geddon Me ansome

    Geddon Me ansomeMaand geleden

    Only criticism i have got is , could you please be a bit more enthusiastic with your presentations. I,m being sarcastic. English humor.

  28. Michael lemons

    Michael lemonsMaand geleden

    Looks like someone hit the wall and took all the good shit off and put the junk in it thinking it would be junked

  29. Rickey Compton

    Rickey ComptonMaand geleden

    I need that recipe.

  30. J Sol

    J SolMaand geleden

    Fuck im watching this stoned. Momma goonzquad got me hungry asl

  31. Elisha Houser

    Elisha HouserMaand geleden

    Those are traction bars for the axle having less movement

  32. Michael Blackburn

    Michael BlackburnMaand geleden

    I wonder if it was parked in his driveway or on the street and someone side swiped it

  33. larry upton

    larry uptonMaand geleden

    There's nothing stock in that car except the body which is trashed.

  34. GCR rizoma

    GCR rizomaMaand geleden

    Great job always boys! Super endless love and support for your energetic efforts in everything. I would like to reccomend a name that you can find out and consider to contact if you think necessary for your Camaro build. His name is Steve and he is a really good knowledge in classic muscle cars. Maybe it could be a great idea to contact him for more to know. Here's his FB page below 👇 Best of luck boys and be kind to yourself! Love & support 💪👏👍 Farook


    MALI JACKSONMaand geleden

    These guys live in mt neighborhood lol

  36. irshad kamal

    irshad kamalMaand geleden

    where are your parents actually from?

  37. Jhon doe

    Jhon doeMaand geleden

    Past owner did a engine swap after the crash.

  38. 1980timsmith

    1980timsmithMaand geleden

    Yank that crap and buy a crate motor and trans.

  39. Trey Clodfelter

    Trey ClodfelterMaand geleden

    Shoot y’all got scammed harddddd he literally got a replacement car or truck and took everything off this one and put it in the new vehicle that’s a truck engine that’s not the original thay swapped it and basically stripped it I knew it was going to be like that when the inside the interior was lose and stuff missing and especially the gas pedal so at this point y’all can make ur own race car 😂🤘

  40. Hunter Lucas

    Hunter LucasMaand geleden

    Looks like someone took out the built motor and put in a stock 5.3 motor 😂

  41. CEO

    CEOMaand geleden

    My type of video..

  42. Sergey Novak

    Sergey NovakMaand geleden

    12:18 - Кинь сокиру... кхе. - Що "кхе"? Зловив?

  43. Landon Jones

    Landon JonesMaand geleden

    Guarantee the car was pro or super charged. Which is why the serpentine is loose. Or the tensioner is bad

  44. jeffslegacy

    jeffslegacyMaand geleden

    Even if this is in fact a Lemon which it’s really looking like it. I am super excited to see you guys succeed in making this car bad ass again like I know you will! Stick with it boys!

  45. markmtnfn6

    markmtnfn6Maand geleden

    Hope you boys didn't get the shaft on this car! Looks like someone salvaged what they could then parked it. I have full faith you two can get it on the revive it!

  46. Newnan Dawg

    Newnan DawgMaand geleden

    i need to be adopted.

  47. Newnan Dawg

    Newnan DawgMaand geleden

    still a 67. id take it.

  48. David Hipp

    David HippMaand geleden

    When did 'dude' become a verbal period? Went from the 2019 Denali build to this...can't even get through it.

  49. LV’s Honda

    LV’s HondaMaand geleden

    I tried to watch this video but got annoyed

  50. Dave Van Gemert

    Dave Van GemertMaand geleden

    I hope you guys read the comments. Reach out to "watch jr go" NLpush channel. He does the same stuff as y'all. He also just bought recently a black 67 Camaro ss and did an 5.3 ls swap and made it to last years LS Fest, which hss any vehicle on the planet welcome as long as you put an LS in it. It'll be good for you guys to get out of the house and broaden your horizons!!!

  51. Agiotéx

    AgiotéxMaand geleden

    I think you guys should use “fuel tech” eletotronic injection, it can be the brain of the car and control everything, injection, sparcs, lights, temperature, etc.. Fuel tech is a Brazilian product and i’m Brazilian too 🇧🇷

  52. John Doe

    John DoeMaand geleden

    You got screwed dudes...

  53. Russell Davis

    Russell DavisMaand geleden

    please buy NEW upper control arms and do not use the one you used the hammer on!

  54. Dale Stephens

    Dale StephensMaand geleden

    don't let the neg people get to you you just don't know what you have here like i said you have a Chip Foss Car I think I remember this car being built try to get with Chip and see what all he did to this car I think he will talk to you all and teach you some hot rod stuff the exust is a magnaflow that guy built alot of Chips exust good luck and be carefull dont't take those bars off the back they are for trac and you remove them the car will be out of control

  55. Dale Stephens

    Dale StephensMaand geleden

    yo don't change those bars on the rear or it will be out of control it will spin out and you could get hurt

  56. Dale Stephens

    Dale StephensMaand geleden

    the rear end bars they are called ladder bars and they are right the one looks bent i wish i could come help you build this thing I am from north carolina i would build you one bad ass motor and trans set up would probaly out run the lambo

  57. Dale Stephens

    Dale StephensMaand geleden

    the trans i think i might be wrong 700r4

  58. Dale Stephens

    Dale StephensMaand geleden

    if i remember right a built 700 r 4 shift kit the whole 9 yards Chip does not build half way he builds it all the way

  59. Dale Stephens

    Dale StephensMaand geleden

    the fan is the trans cooler i see alot of work ahead of you all

  60. Dale Stephens

    Dale StephensMaand geleden

    this is a chip foss car i am not sure i remember when he built it

  61. bigbabysmc

    bigbabysmcMaand geleden

    chopped up old motor, definitely not original engine...too many unknowns here...

  62. chuck kolor

    chuck kolorMaand geleden

    Hey guys, this is Kolor and I actually did the paint job on that car , installed the interior , and Parts, Kolor of Kolor me Kustom.

  63. Kevin Macias

    Kevin MaciasMaand geleden

    Charger para cuando?

  64. SeaDooEric

    SeaDooEricMaand geleden

    Part 2…..and nothing has been done yet…….daaaaannnggg

  65. Brian Lovell

    Brian LovellMaand geleden

    You are absolutely correct on the “driveshaft loop”. If the driveshaft breaks, it keeps it from coming through the floor. You need it installed for drag racing, as far as per safety requirements.

  66. Jason Schrecengost

    Jason SchrecengostMaand geleden

    Guys, reach out to Cleetus and his newly partnered motion raceworks! I’m sure he would be willing to guide you in the right direction to do a epic build!

  67. Hussain Mirza

    Hussain MirzaMaand geleden

    Definitely bad idea for vintage. Stick to new cars guys... M5 or c63 please

  68. Uptown DC

    Uptown DCMaand geleden

    Dude !!! Dude dude !! Lol

  69. Rodney Armstrong

    Rodney ArmstrongMaand geleden

    Caltracks are the best for the rear of that car

  70. Rodney Armstrong

    Rodney ArmstrongMaand geleden

    They took the old motor and trans and the cooler is for the transmission


    MISSION PASSEDMaand geleden

    What a Black Beauty!

  72. Jose Soriano Montes

    Jose Soriano MontesMaand geleden

    Very sad that you do not know chip Foose the designer of the wheels of this project, I recommend you to see some episodes of overhaulin, it is dedicated to cars mods.

  73. Thomas Whiz Whisnant

    Thomas Whiz WhisnantMaand geleden

    When two kids who think they know cars start working on a car that they can't order out of a catalog......

  74. Jan-Hendrik Bussmann

    Jan-Hendrik BussmannMaand geleden

    The cars are all very nice and such, but the life you two have with your big family around, that is the really amazing thing on this channel.

  75. Ken Balentine

    Ken BalentineMaand geleden

    I kinda wish y’all would out the guy that swapped the engine but I know y’all won’t cause y’all are just stand up guys and probably aren’t even as mad about it as I am lol I know one thing y’all will have this camaro looking good and running good when your done with it

  76. Ken Balentine

    Ken BalentineMaand geleden

    Every time one of you guys says dude I get hyped up love your guys energy and love your channel

  77. David Landeck

    David LandeckMaand geleden

    Think l saw a small ding on the drinker's side...little Bondo might do it👍

  78. Mr Man

    Mr ManMaand geleden

    i bet they swapped out the motor and transmission. stuck in a scrapped unit

  79. Nicholss Buczkowski

    Nicholss BuczkowskiMaand geleden

    Dude I love how yall finally started working on old classic cars, please do more

  80. Jonathan Sanchez

    Jonathan SanchezMaand geleden

    Replace oil pan with a c6 vette oil pan.

  81. Khalil Carthan

    Khalil CarthanMaand geleden

    I knew it was an iron block when I saw the oil pan.

  82. James Schug

    James SchugMaand geleden


  83. Shawn Richardson

    Shawn RichardsonMaand geleden

    The trans is a 700 R4 but they been doing some swapping. If that F.A.S.T. Fuel system was on the motor when the car was built then contact F.A.S.T. About an ECU. Grab a torque wrench and see if the engine will bar over. Pull the pan and see if there is metal in it. There is no Fluids cause they swapped every thing. If every thing is junk then Texas speed can build you 2’000 hp crate engine and you can mate it with a Lynco transmission shifted with paddle shifters lol 😂 Now that would be big fun 🤣

  84. Part Time Hooker Pulling Team

    Part Time Hooker Pulling TeamMaand geleden

    For doing what you do for as long as u guys have either you really don’t know your stuff or your playing dumb but you don’t sound educated guys.

  85. Sergio Vazquez

    Sergio VazquezMaand geleden

    RB26 swap

  86. Bill Woolmer

    Bill WoolmerMaand geleden

    Texas Speed Shop will set you guys up !!!! They are the masters of the LS engine

  87. BILL

    BILLMaand geleden

    pop's is funny

  88. Chris B

    Chris BMaand geleden

    this car is junked boys

  89. BOOMER 24&7

    BOOMER 24&7Maand geleden

    get bent maldavani! your ass got played on this one

  90. Duce Zaak

    Duce ZaakMaand geleden

    I hope ya give this to your pops

  91. Matthew Myers

    Matthew MyersMaand geleden

    Yeah those hime joints are bad on them track bars

  92. Matthew Myers

    Matthew MyersMaand geleden

    Those are driveshaft hoops to keep the driveshaft from falling out and by the flywheel it’s missing the dust shield you don’t have to have it

  93. Jamie quinn

    Jamie quinnMaand geleden

    Oh my these guys are no way car guys coming across as clueless Stevie wonder could see the car was gutted before auction

  94. tonymayo1973

    tonymayo1973Maand geleden

    Love seeing your parents in the videos.

  95. Ethan Brockman

    Ethan BrockmanMaand geleden

    I can already see it coming in about a month the heli is going to get kicked out of the garage and they will forget about it

  96. Larry Murray

    Larry MurrayMaand geleden

    You guys have to take it to the track when yall done ✔!!!?

  97. Dslade

    DsladeMaand geleden

    Definitely took out all the good stuff and left what he had too!

  98. Caleb Wooldridge

    Caleb WooldridgeMaand geleden

    Texas speed 427 swap. Throw that motor and trans out

  99. usher63124

    usher63124Maand geleden got screwed.

  100. cbrf3

    cbrf3Maand geleden

    6 min in and I have a feeling the owner crashed it and threw a messed up motor in there so insurance would do a pay out

  101. Richard Welty

    Richard WeltyMaand geleden